Building a Tower PC – The FurniturePosted: December 15, 2016
This is what home computing should look like…
Reminiscent of a Memorex commercial (for those who can remember that iconic commercial with the fellow sitting in his lounger and being blown away).
There’s no point in building out a kick ass liquid cooled blinky light PC if you’re not going to show off your work. So, I got to thinking about the piece of furniture that was going to showcase the build, and I came up with this design. It’s built out of 2×4 lumber and MDF, because that’s the stock I had in the garage, and I needed to get rid of it to make room for more…
My design goal was a workbench like thing whose sole purpose would be to act as a computer work table/cabinet thing. I don’t need a ton of drawers, I can simply stack plastic bins in there, or outside, if I feel I really need them. I wanted an ample keyboard/mouse surface, because sometimes I need to place another laptop on the surface, or write stuff, and it’s nice to have the room to just push the keyboard back and use the worktop as a worktop.
I started out with a fairly standard looking garage workbench carcass.
I put that power strip in there because it’s totally hidden when the workbench top is on, and it provides enough outlets, spaced far enough apart, that I can plug in the computer, 2 or three monitors, extra lights, speakers, and other stuff that might so happen to be sitting on the work top.
The thing is roughly 36″ on a side, with the worktop being 36″x33″ if memory serves correctly.
This is in my ‘home office’ room, so there is carpet. I had the dilemma of how to cart the thing around, because fully loaded, it’s quite heavy, and unwieldy. I had a package of those furniture moving pads in a drawer, so I whipped those out, and they work a treat! Each pad has a vinyl plate bottom, with a rubber top. The 2×4 lumber sits nicely in the rubber, and I can easily move this thing all over my office all by myself.
With the demands of family, this took roughly two days to assemble. Now that it all works, I can think about actually finishing it. The things I want to do are to make it more like furniture, and less like something you’d find in the garage. That means, doing some sanding, mahogany staining, varnish, and the like. I’ll top the 3/4″ MDF top with an 1/8″ piece of hard board, and put some trim around the edge, to act as a buffer, and to hide the seam between the hardboard and MDF. This makes for a nice durable surface that I can tape paper to every once in a while if I so happen to do any gluing or other craft work.
I’ve added the speaker system to the workbench, but right now it’s just kind of there, with the wires hanging all over. I’ll have to drill a couple of circular holes for wire pass through. To further make it kid proof, I’ll add some plexiglass siding, to keep their delicate little fingers out of the silently whirring fans.
Putting the computer in the corner as it is, is a pretty good thing. It’s not taking up main floor space like the desk I was using. That gives me a ton of space to do other stuff, like setup a mini 3D printer farm. There’s a corner over by the window ready for exactly that.
In a fit of inspiration, I also removed the couch and chairs, which more often than not were collection places for junk. Now I have an entirely open wall, ready for yet another workbench something or other. Oddly enough, the wall on that side of the room is totally bare, and would be a perfect place to receive a 150″ micro projected image, as a large book case is on the opposite wall. Perhaps that would be good for video conferencing in the large?
At any rate, the killer PC is getting a custom built piece of furniture. I’m getting a new perspective on my home work space, and life is grand.